High Strength Steel C U Section Profile Solar Panel Support For PV Plant Project
C steel channel is made of the hot roll coil by cold processing. It’s thin with light weight, has cross section excellent performance and high strength. Compared with the traditional channel,it can save 30% with the same strength.
As the main structure of the pv mounting system,the galvnized steel are made by good quality Q235B and Q345B.The performance of load-bearing,wind resistance and seismic resistance has been given sufficient consideration,which will ensure the safety of the system.
We adopt advanced galvanized technology, make the appearance of beautiful, has the property of anti corrosivewear-resisting,increasing the utilization rate of the product and service life.
Application:
The C section structural purlins are mainly used for commercial applications but are just as cost effective to be used for smaller type garages and carports. It can also form part of the columns and rafters in these smaller applications made from galvanized or hot rolled black finish steel C section purlins come in different sizes and thicknesses to cater for your needs.
| Name | Size(mm) | Thickness(mm) | Material | Surface treatment | Photo 1 | Photo 2 |
| C type steel | C40*40*10 | 1.5-2.5 | Q235B/Q345B | Hot-Dip Galvanizing | 
| 
|
| C60*40*15 | 1.5-2.5 | Q235B/Q345B | Hot-Dip Galvanizing |
| C80*40*15 | 1.5-2.5 | Q235B/Q345B | Hot-Dip Galvanizing |
| C100*50*15 | 1.5-2.5 | Q235B/Q345B | Hot-Dip Galvanizing |
| C120*50*20 | 1.5-2.5 | Q235B/Q345B | Hot-Dip Galvanizing |
| U type steel | U41*21 | 1.5-2.5 | Q235B/Q345B | Hot-Dip Galvanizing | 
| 
|
| U41*41 | 1.5-2.5 | Q235B/Q345B | Hot-Dip Galvanizing |
| U52*41 | 1.5-2.5 | Q235B/Q345B | Hot-Dip Galvanizing |
| U62*41 | 1.5-2.5 | Q235B/Q345B | Hot-Dip Galvanizing |
| U72*41 | 1.5-2.5 | Q235B/Q345B | Hot-Dip Galvanizing |
Products can be customized according to customer requirement.
Product Tags:
|
|
High Strength C U Section Steel Channel Solar Panel For PV Plant Project Images
|
